Metafor

ULiege - Aerospace & Mechanical Engineering

User Tools

Site Tools


commit:futur:cristian

This is an old revision of the document!


Commit 2017-02-24

Yield criteria

I have implemented some (now) classical yield criteria in order to extend the features of Metafor in this field. The new developments include one isotropic and four anisotropic yield functions.

The respective documentation page has been updated, where a Reference section with external links to relevant papers has been included. Please check the Doc Plastic Criteria webpage (all the details are described there).

The current implementation does not include the analytical computation of the stiffness matrix and takes advantage of the Line-Search strategy to update the stress tensor. So, it gets really slow for large tests.

DruckerPlasticCriterion

Isotropic yield criterion that takes into account $J_2$ and $J_3$, the second and third invariants of the stress deviator. This function lays between the bounds defined by the von Mises and the Tresca yield surfaces.

$$ \left\lbrace 27 \left[(J_2)^{3}-c(J_3)^{2}\right] \right\rbrace ^{1/6} - (\sigma_{vm} + \sigma_{visq} + \sigma_{grainSize} + ...) = 0 $$

CazacuBarlat01OrthoPlasticCriterion

This criterion is based on the generalization of the classical invariants $J_2$ and $J_3$ within the framework of the theory of representation of anisotropic functions. This method is then used to extend the Drucker's yield function to orthotropy as follows.

$$ \left\lbrace 27 \left[(J_2^0)^{3}-c(J_3^0)^{2}\right] \right\rbrace ^{1/6} - (\sigma_{vm} + \sigma_{visq} + \sigma_{grainSize} + ...) = 0 $$

where $J_2^0$ and $J_3^0$ are the generalized second and third invariants of the stress deviator to orthotropy, respectively.

CazacuBarlat04OrthoPlasticCriterion

Extension to orthotropy of the isotropic yield function proposed by the same authors (already in Metafor), which takes into consideration the asymmetry between tension and compression in yielding exhibited by some materials e.g., Al alloys, Ti alloys, Mg alloys.

$$ \sqrt{3}\left[ (J_2^0)^{3/2}-cJ_3^0 \right] ^{1/3} - (\sigma_{vm} + \sigma_{visq} + \sigma_{grainSize} + ...) = 0 $$

where $J_2^0$ and $J_3^0$ are the generalized second and third invariants of the stress deviator to orthotropy, respectively.

YoshidaUemori13J2J3OrthoPlasticCriterion

This criterion corresponds to a 6th-order polynomial type 3D yield function developed by a sum of several components of the CazacuBarlat01OrthoPlasticCriterion in order to obtain higher flexibility. It is worth to mention that in this case, the extension of the invariants $J_2$ and $J_3$ is performed by means of linear transformations of the stress deviator.

$$ \newcommand{\sbraces}[1]{\left[#1\right]} \newcommand{\cbraces}[1]{\left(#1\right)} \newcommand{\gbraces}[1]{\left\lbrace #1\right\rbrace} \gbraces{\frac{27}{n}\sum^{n}_{m=1}\sbraces{\tilde{J_2}^{(m)}}^3 - \xi_m \sbraces{\tilde{J_3}^{(m)}}^2}^{1/6} - (\sigma_{vm} + \sigma_{visq} + \sigma_{grainSize} + ...) = 0 $$

where $\tilde{J_2}$ and $\tilde{J_2}$ are the generalized second and third invariants of the stress deviator to orthotropy, respectively.

YoshidaUemori13J2OrthoPlasticCriterion

This yield function is a particular case of the YoshidaUemori13J2J3OrthoPlasticCriterion, which take into consideration only the $\tilde{J_2}$ extended invariant for its construction. $$ \newcommand{\sbraces}[1]{\left[#1\right]} \newcommand{\cbraces}[1]{\left(#1\right)} \newcommand{\gbraces}[1]{\left\lbrace #1\right\rbrace} \gbraces{\frac{27}{n}\sum^{n}_{m=1}\sbraces{\tilde{J_2}^{(m)}}^3}^{1/6} - (\sigma_{vm} + \sigma_{visq} + \sigma_{grainSize} + ...) = 0 $$

CazacuBarlat04IsotropicPlasticCriterion

Some corrections were done in the implementation of this criterion along with the addition of a couple of tests (it was in the official version of Metafor but it was not tested in the battery of tests).

$$ \sqrt{3}\left[ (J_2)^{3/2}-cJ_3 \right] ^{1/3} - (\sigma_{vm} + \sigma_{visq} + \sigma_{grainSize} + ...) = 0 $$

Work in progress

  1. Implementation of analytical computation of the stiffness matrix for the update of the stress tensor.
  2. Implementation of some other yield functions:
    • HosfordPlasticCriterion
    • Barlat2000OrthoPlasticCriterion (Yld2000-2d)
    • Barlat0413pOrthoPlasticCriterion (Yld2004-13p)
    • Barlat0418pOrthoPlasticCriterion (Yld2004-18p)
    • CazacuBarlat06IsotropicPlasticCriterion
    • CazacuBarlat06OrthoPlasticCriterion

Fichiers ajoutés/supprimés

[a]: mtMaterials\plasticCriteria\CazacuBarlat01OrthoPlasticCriterion.cpp
[a]: mtMaterials\plasticCriteria\CazacuBarlat01OrthoPlasticCriterion.h
[a]: mtMaterials\plasticCriteria\CazacuBarlat04OrthoPlasticCriterion.cpp
[a]: mtMaterials\plasticCriteria\CazacuBarlat04OrthoPlasticCriterion.h
[a]: mtMaterials\plasticCriteria\DruckerPlasticCriterion.cpp
[a]: mtMaterials\plasticCriteria\DruckerPlasticCriterion.h
[a]: mtMaterials\plasticCriteria\YoshidaUemori13J2J3OrthoPlasticCriterion.cpp
[a]: mtMaterials\plasticCriteria\YoshidaUemori13J2J3OrthoPlasticCriterion.h
[a]: mtMaterials\plasticCriteria\YoshidaUemori13J2OrthoPlasticCriterion.cpp
[a]: mtMaterials\plasticCriteria\YoshidaUemori13J2OrthoPlasticCriterion.h
[r]:

Cas tests ajoutés/supprimés

[a]: apps\monosMaterials2\CB01Ortho2090T3.py
[a]: apps\monosMaterials2\CB04IsoCMax.py
[a]: apps\monosMaterials2\CB04IsoCMin.py
[a]: apps\monosMaterials2\CB04OrthoMg05Th.py
[a]: apps\monosMaterials2\DruckerCMax.py
[a]: apps\monosMaterials2\DruckerCMin.py
[a]: apps\monosMaterials2\YUJ2J3Ortho980Y.py
[a]: apps\monosMaterials2\YUJ2Ortho980Y.py
[r]: 

Cristian 2017/02/24

commit/futur/cristian.1487955841.txt.gz · Last modified: 2017/02/24 18:04 by canales

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki