Metafor

ULiege - Aerospace & Mechanical Engineering

User Tools

Site Tools


team:gdeliege

This is an old revision of the document!


Geoffrey

Geoffrey DELIEGE

Research engineer

Contact

E-mail : geoffrey.deliege@ulg.ac.be
Phone : +32 (0)4 366 95 91
Address : Université de Liège - Aerospace and Mechanics
Quartier Polytech 1 - B52/3 (office +2/541)
Allée de la Découverte 13 A
B-4000 Liège, BELGIUM

Research activities

Composite materials

Carbon-Fibre-Reinforced Polymers (CFRP) are now widely used in aerospace industry thanks to their high strength-to-weight ratio. However, the numerical simulation of CFRP laminates up to failure is not trivial: laminates have anisotropic mechanical properties and laminate damage results from a combination of microscopic mechanisms (fibre brittle failure, fibre-matrix debonding, matrix ductile failure and delamination) that are not easily described at a macroscopic level.

My objective was to implement a material model for composite plies with woven fibre reinforcement in Metafor. This model is inspired by the meso-model proposed by P. Ladevèze and O. Allix [1-2] for unidirectional composites as well as the 2D model for woven composites proposed by C. Hochard [3].

The idea is to describe the laminate as a stack of 3D orthotropic plies separated by 2D interfaces. In a direction parallel to the fibres, the plies are elastic and subject to brittle fracture; in shear, an elastoplastic behaviour is assumed and progressive damage is introduced. The 2D interfaces between the plies are elastic with progressive damage. Practical information on the orthotropic materials and damage evolution laws is available on the Metafor web page.

One interesting feature of Ladevèze and Allix's work is that most parameters of the constitutive laws can be linked to physical quantities. Therefore, these parameters can be identified with suitable experimental tests.

Finite element simulation (Metafor) of an impacted stiffener made of woven carbon fibre laminate

References

[1] P. Ladevèze, E. Le Dantec. Damage modelling of the elementary ply for laminated composites. Composites Science and Technology, Vol. 43, pp. 257-267, 1992
[2] O. Allix, P. Ladevèze. Interlaminar interface modeling for the prediction of laminate delamination. Composite Structures, Vol. 22, pp. 235-242, 1992
[3] C. Hochard, P.-A. Aubourg, J.-P. Charles. Modelling of the mechanical behaviour of woven-fabric CFRP laminates up to failure. Composites Science and Technology, Vol. 61, pp. 221–230, 2001

Composite materials
Shearography
Electrostatic painting

Publications

team/gdeliege.1439361003.txt.gz · Last modified: 2016/03/30 15:22 (external edit)