Metafor

ULiege - Aerospace & Mechanical Engineering

User Tools

Site Tools


doc:user:geometry:import:tuto2

This is an old revision of the document!


Reading SAMCEF files

Introduction

Advanced Diue to historical reasons, the preprocessor of SAMCEF (called BACON) can be used to generate a mesh and geometrical entities. The module toolbox.samcef defines functions that convert a .fdb file (fdb stands for “formatted database”) to commands that Metafor understands. If a .dat file (i.e. a BACON script file) is provided, Metafor automatically runs BACON first as a background process in order to create the missing .fdb file. In this case, a SAMCEF license is required.

Using BACON is not recommended! The user who wants to use a another preprocessor should have a look at gmsh which is modern, free, and sometimes more robust than BACON.

BACON Part

Input file description

The example simulation consists of a sheared cube (lower and upper faces and fixed and moved one with respect to another). The figure below shows the geometry:

Geometry of the model

The BACON input file named cubeCG.dat (located in apps/ale) contains the commands used to create the geometry, the mesh and node groups (selections).

Geometry

The geometry is created with the following BACON commands (see BACON manual for details):

  • .3POI for the 8 points.
  • .3DRO for the 12 edges.
  • .CON for the 6 wires.
  • .FACE for the 6 sides.
  • .PLAN to create a surface (required for the 2D domain, see below).
  • .VPEAU for the skin.
  • .DOM for the domain (one 3D domain - the cube - and one 2D domain - the lower side which will be meshed and extruded).

Mesh Generation

  • Performed with .GEN.
  • Lines are meshed with the command “MODIFIE LIGNE”.
  • The lower side is meshed with a transfinite mapping (command “transfini”) and extruded with the command “EXTRUSION”.
  • An attribute number must then be defined.

Choice of Element Type

  • The command .HYP VOLUME is used (in 2D and 3D).

Definition of node/element groups (selections)

  • The command .SEL is used
  • If .REN is used to change the numbering of nodes and mesh elements, it should be done before the .SEL.
  • Node selections will be used to define boundary conditions (fixations, contact, …) in the Metafor model.

What can be imported from BACON?

  • Points
  • Curves: Line - Arc (points generated automatically with a negative numbed in Metafor are shifted (numPoint = numMaxPoints-numPoint)
  • Surface: Plan - Ruled - Coons (Only planes defined using three numbers are imported (other planes generate cpoints outside db) ).
  • Wire
  • Sides: Imported (even if not treated by Bacon)
  • Skins: If MultiProjSkin objects are created, it is best to create them in the Python data set.
  • Nodes: (imported as MeshedPoints)
  • Mesh elements: Triangle - Quad - Tetra - Hexa (with recovery in Metafor)
  • Selections: only groups of nodes are imported (other have no use in Metafor)
  • “DAO – Mesh” relations are not read again (nodeOnLine, …)

Creation of the ''.fdb'' BACON file

BACON can be started manually with the command:

samcef ba aleCubeCg n 1

From the .dat file, a .fdb is created with BACON with the commands:

INPUT
.SAUVE DB FORMAT
.STO

Conversion of the data into a Python script

In Metafor, the file .dat is converted thanks to a conversion module named toolbox.samcef (see apps.ale.cubeCG):

import toolbox.samcef
bi = toolbox.samcef.BaconImporter(domain, os.path.splitext(__file__)[0]+'.dat' )
bi.execute()

where domain is the domain that should be filled with the converted mesh and geometry. The second argument corresponds to the full path to the file cubeCG.dat (it is calculated from the full path of the python input file).

If all goes well, a file cubeCG.fdb is then created in the folder workspace/apps_ale_cubeCG

Element Generation in Metafor

The BACON attributes are converted to Groups in Metafor. For example, if attribute #99 has been used when generating mesh in BACON, all the elements are stored in groupset(99) in Metafor.

app = FieldApplicator(1)
app.push(groupset(99))
interactionset.add(app)

Boundary conditions in Metafor

Selections in BACON are translated into Groups with the same number. Boundary conditions such as prescribed displacements or contact can be thus defined easily in Metafor. For example, a selection such as .SEL GROUPE 4 NOEUDS can lead to the following command in the input file:

loadingset.define(groupset(4), Field1D(TX,RE))
Consequence: Groups should be defined with a different number from attributes
doc/user/geometry/import/tuto2.1420726678.txt.gz · Last modified: 2016/03/30 15:22 (external edit)

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki