This is an old revision of the document!

Double cup extrusion test

Experimental friction test (Bushhausen /Altan -Ohio State University - 1992).
Mean friction coefficient is deduced from the comparison of experimental and numerical (FEM) “cup height ratios” h1/h2 ( =1 if frictionless).
Frictional conditions close to the forging process:
- Interface pressure ~ 2500MPa.
- Surface temperature ~600°C.
- Surface enlargement ~3000%.
Typical numerical simulation needs remeshing.

<html> <iframe width=“480” height=“420” src=“www.youtube.com/embed/PL5sy0cWGWQ” frameborder=“0” allowfullscreen></iframe> </html> </WRAP>

Comparison with FE results obtained using Deform2D (and remeshing).

</WRAP>

applications/ale/dcup-extrusion.1525439252.txt.gz · Last modified: 2018/05/04 15:07 by boman