Metafor

ULiege - Aerospace & Mechanical Engineering

User Tools

Site Tools

You are here: metafor.ltas.ulg.ac.be » doc » Documentation » tutorials » How to build my own FE model?
Trace:
doc:user:tutorials:tuto1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
doc:user:tutorials:tuto1 [2016/07/11 15:47] – boemerdoc:user:tutorials:tuto1 [2016/07/11 16:06] – [Mesh] boemer
Line 229: Line 229:
 The meshers ([[doc:user:geometry:mesh:1d|1D Mesher]], [[doc:user:geometry:mesh:2d|2D Mesher]]) are linked to the entity that must be meshed and executed with the command ''execute()''. For face 1, the [[doc:user:geometry:mesh:2d|integrated mesher TIM]] (Transfinite Interpolation Method), suitable for quadrangles where two opposite edges have the same numbers of elements, is used. The meshers ([[doc:user:geometry:mesh:1d|1D Mesher]], [[doc:user:geometry:mesh:2d|2D Mesher]]) are linked to the entity that must be meshed and executed with the command ''execute()''. For face 1, the [[doc:user:geometry:mesh:2d|integrated mesher TIM]] (Transfinite Interpolation Method), suitable for quadrangles where two opposite edges have the same numbers of elements, is used.
  
-As for the geometry, it is recommended to visually check whether the piece was meshed properly by opening a ''VizWin'' window with the following lines :+As for the geometry, it is recommended to visually check whether the geometry was meshed properly by opening a ''VizWin'' window with the following lines :
  
  
doc/user/tutorials/tuto1.txt · Last modified: 2016/07/11 16:45 by boemer
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki