Differences

This shows you the differences between two versions of the page.

--- doc:user:geometry:mesh:1d [2015/01/07 18:13] – [Generating cells alone] boman
+++ doc:user:geometry:mesh:1d [2016/03/30 15:23] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== 1D Meshers ======
+====== 1D Meshers (Curves) ======
 FIXME __Mesh Elements versus Finite Elements__: these two notions are different and should not be misunderstood. A mesh is made of geometric cells, the mesh elements. A finite element is a physical entity, which is supported by a mesh element. In Metafor, this is a two-steps method: first, the mesh is created, then the finite elements are applied to the mesh (this second step is done once the integration is started and programmed in the ''InteractionSet'').
@@ Line 26: / Line 26: @@
    HighDegreeSimpleMesher1D(curveset(number), degree).execute(ne, d, cells)
-Note : The ''d'' parameters is used to create segments ''d'' times smaller at the beginning of the curve than at its end. Therefore, the curve orientation matters.
+Note : The ''d'' parameter is used to create segments ''d'' times smaller at the beginning of the curve than at its end. Therefore, the curve orientation matters.
 ==== Density mesher - DensityMesher1D ====