Differences

This shows you the differences between two versions of the page.

--- doc:user:conditions:dead_loads [2013/07/12 13:28] – joris
+++ doc:user:conditions:dead_loads [2016/03/30 15:23] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
+====== Prescribed Nodal "Dead" Loads ======
+ {{:doc:user:ico-advanced.png?40|Advanced}}{{:doc:user:ico-danger.png?40|Danger!}}
+Dead loads are forces that are directly prescribed at the nodes of the mesh. The amplitude and direction of such forces is known a priori. In particular it is independent from the deformation of the underlying material. Such forces also strongly depend on the chosen mesh desnity. Changing the mesh usually requires a complete redefinition of these forces.
+<note important>As a consequence, it is usually a bad idea to define nodal "dead" loads in a model. To model realistic loads (pressure and shear) which depend on the deformed configuration and do not depend on the mesh density, use [[doc:user:elements:boundaries:pressure_shear]].</note>
+Anyway, the command used for the definition of "dead loads is the same as [[doc:user:conditions:displacements]] except that [[doc:user:general:locks|Field1D]] refers to a force instead of a displacement.