Metafor

ULiege - Aerospace & Mechanical Engineering

User Tools

Site Tools


team:gdeliege:composite

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
team:gdeliege:composite [2015/08/13 12:18] geoffreyteam:gdeliege:composite [2016/03/30 15:23] (current) – external edit 127.0.0.1
Line 1: Line 1:
-==== Composite materials ====+===== Composite materials ===== 
 + 
 +=== Background ===
  
 Carbon-Fibre-Reinforced Polymers (CFRP) are now widely used in aerospace industry Carbon-Fibre-Reinforced Polymers (CFRP) are now widely used in aerospace industry
Line 8: Line 10:
 (fibre brittle failure, fibre-matrix debonding, matrix ductile failure and delamination) (fibre brittle failure, fibre-matrix debonding, matrix ductile failure and delamination)
 that are not easily described at a macroscopic level. that are not easily described at a macroscopic level.
 +When I joined the MN2L-group, my first objective was to implement a material model for composite laminates with woven fibre reinforcement in Metafor. This was part of a project in collaboration with Sonaca, LMS-Samtech and the Université Catholique de Louvain, among others.
  
-My objective was to implement a material model for composite plies with woven fibre +=== Constitutive laws === 
-reinforcement in Metafor. + 
-This model is inspired by the meso-model+This model I implemented is inspired by the meso-model
 proposed by P. Ladevèze and O. Allix [1-2] for unidirectional proposed by P. Ladevèze and O. Allix [1-2] for unidirectional
 composites as well as the 2D model for woven composites proposed by C. Hochard [3]. composites as well as the 2D model for woven composites proposed by C. Hochard [3].
- 
 The idea is to describe the laminate as a stack of 3D orthotropic plies separated by 2D interfaces. The idea is to describe the laminate as a stack of 3D orthotropic plies separated by 2D interfaces.
-In a direction parallel to the fibres,+In directions parallel to the fibres,
 the plies are elastic and subject to brittle fracture; the plies are elastic and subject to brittle fracture;
-in shear, an elastoplastic behaviour is assumed and progressive damage is introduced.+in shear, an elastoplastic behaviour with progressive damage is assumed.
 The 2D interfaces between the plies are elastic with progressive damage. The 2D interfaces between the plies are elastic with progressive damage.
 Practical information on the Practical information on the
Line 28: Line 30:
 One interesting feature of Ladevèze and Allix's work is that most parameters of the constitutive laws One interesting feature of Ladevèze and Allix's work is that most parameters of the constitutive laws
 can be linked to physical quantities. can be linked to physical quantities.
-Therefore, these parameters can be identified with suitable experimental tests.+Therefore, these parameters can be identified with suitable experimental tests. For example, the hardening and damage parameters characterizing the shear behaviour are determined by cyclic loading tests on a $[(+45^\circ/-45^\circ)_n]_S$ laminate (Fig. 1).
  
-{{ :team:gdeliege:stiffener2d.png?direct |Finite element simulation (Metafor) of an impacted stiffener made of woven carbon fibre laminate}}+Complex as they are, these models neglect important phenomena like the viscoplastic behaviour of the resin or the specific damage mechanism under compressive loadingI am currently working on compressive damage of woven fibre laminates. My goal is to introduce in the mesoscopic model a damage evolution law accounting for the microscopic instabilites (microbuckling) generated in a ply under compression.
  
-{{ :team:gdeliege:comp01.png |}}+{{ :team:gdeliege:comp05.png?500 |}} 
 +//Figure 1. Cyclic loading of a laminate sample with ply orientation $[(+45^\circ/-45^\circ)_n]_S$ : comparison between experimental results and Metafor results.//
  
-{{ :team:gdeliege:comp02.png |}}+{{ :team:gdeliege:stiffener2d.png?direct500 |}} 
 +//Figure 2. Finite element simulation (Metafor) of an impacted stiffener made of woven carbon fibre laminate//
  
-== References ==+{{ :team:gdeliege:comp01.png?direct500 |}} 
 +//Figure 3. Finite element simulation (Metafor) of an End-Notched Flexure (ENF) test. It consists in a 3-point bending of a sample with an artificial mid-plane delamination. ENF tests are used to determine the mode II interlaminar fracture toughness of laminates.// 
 + 
 +{{ :team:gdeliege:comp04.png |}} 
 +//Figure 4. Impact simulation : (left) experimental setup for impact testing at [[http://www.uclouvain.be/en-imap.html|UCL-IMAP (Prof. Pardoen)]], (right) finite element model of the impact test; the impactor is represented as a rigid sphere having the same mass and kinetic energy as the experimental impactor.// 
 + 
 +{{ :team:gdeliege:comp03.png |}} 
 +//Figure 5. Impact simulation with finite elements (Metafor) on a quarter of a plate : maximum of the orthotropic damage variables $d_{11}$, $d_{22}$ and $d_{12}$, ranging from 0 (blue) to 1 (red).// 
 + 
 +=== References ===
  
 [1] P. Ladevèze, E. Le Dantec. //Damage modelling of the elementary ply for laminated composites.// Composites Science and Technology, Vol. 43, pp. 257-267, 1992 \\ [1] P. Ladevèze, E. Le Dantec. //Damage modelling of the elementary ply for laminated composites.// Composites Science and Technology, Vol. 43, pp. 257-267, 1992 \\
 [2] O. Allix, P. Ladevèze. //Interlaminar interface modeling for the prediction of laminate delamination.// Composite Structures, Vol. 22, pp. 235-242, 1992 \\ [2] O. Allix, P. Ladevèze. //Interlaminar interface modeling for the prediction of laminate delamination.// Composite Structures, Vol. 22, pp. 235-242, 1992 \\
 [3] C. Hochard, P.-A. Aubourg, J.-P. Charles. //Modelling of the mechanical behaviour of woven-fabric CFRP laminates up to failure//. Composites Science and Technology, Vol. 61, pp. 221–230, 2001 \\ [3] C. Hochard, P.-A. Aubourg, J.-P. Charles. //Modelling of the mechanical behaviour of woven-fabric CFRP laminates up to failure//. Composites Science and Technology, Vol. 61, pp. 221–230, 2001 \\
 +\\ 
 +[[team:gdeliege|Back to main page]]
  
team/gdeliege/composite.1439461136.txt.gz · Last modified: 2016/03/30 15:22 (external edit)

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki