Metafor

ULiege - Aerospace & Mechanical Engineering

User Tools

Site Tools


doc:user:general:ifields

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
doc:user:general:ifields [2014/01/08 11:21] wauteletdoc:user:general:ifields [2018/08/30 12:56] (current) papeleux
Line 1: Line 1:
-====== Grandeurs "internes" ======+====== Fields at Gauss Points ======
  
-Les grandeurs stockées aux points d'intégration des éléments sont référencées par des codes ayant le préfixe ''IF_'' (pour **I**nternal **F**ield)+Fields that are computed at each integration point are referenced by codes with the ''IF'' prefix (standing for **I**nternal **F**ield).
  
-^  Code Metafor  ^  Description + 
-| ''IF_DEV_SIG_XX''contraintes déviatoriques de Cauchy (voir remarque importante en fin de page) |+^  Metafor Code   Description 
 +| ''IF_DEV_SIG_XX'' | Cauchy stress deviator tensor (see important remark at the bottom) |
 | ''IF_DEV_SIG_YY'' |  :::| | ''IF_DEV_SIG_YY'' |  :::|
 | ''IF_DEV_SIG_ZZ'' |  :::| | ''IF_DEV_SIG_ZZ'' |  :::|
-| ''IF_SIG_XX''contraintes de Cauchy (voir remarque importante en fin de page) |+| ''IF_SIG_XX'' | Cauchy stress tensor (see important remark at the bottom) |
 | ''IF_SIG_YY'' |  :::| | ''IF_SIG_YY'' |  :::|
 | ''IF_SIG_ZZ'' |  :::| | ''IF_SIG_ZZ'' |  :::|
Line 13: Line 14:
 | ''IF_SIG_XZ'' |  :::| | ''IF_SIG_XZ'' |  :::|
 | ''IF_SIG_YZ'' |  :::| | ''IF_SIG_YZ'' |  :::|
-| ''IF_DEV_SIG_ORTHO_XX''contraintes déviatoriques de Cauchy dans le système d'axe orthotrope entrainé avec la matière (voir remarque importante en fin de page) |+| ''IF_DEV_SIG_ORTHO_XX'' | Cauchy stress deviator tensor in a frame which moves with the matter (see important remark at the bottom) |
 | ''IF_DEV_SIG_ORTHO_YY'' | :::| | ''IF_DEV_SIG_ORTHO_YY'' | :::|
 | ''IF_DEV_SIG_ORTHO_ZZ'' | :::| | ''IF_DEV_SIG_ORTHO_ZZ'' | :::|
-| ''IF_SIG_ORTHO_XX''contraintes de Cauchy dans le système d'axe orthotrope entrainé avec la matière|+| ''IF_SIG_ORTHO_XX'' | Cauchy stress deviator tensor in a frame which moves with the matter|
 | ''IF_SIG_ORTHO_YY'' |:::   | | ''IF_SIG_ORTHO_YY'' |:::   |
 | ''IF_SIG_ORTHO_ZZ'' |:::   | | ''IF_SIG_ORTHO_ZZ'' |:::   |
Line 22: Line 23:
 | ''IF_SIG_ORTHO_XZ'' |:::  | | ''IF_SIG_ORTHO_XZ'' |:::  |
 | ''IF_SIG_ORTHO_YZ'' |:::  | | ''IF_SIG_ORTHO_YZ'' |:::  |
-| ''IF_ALP_XX'' | "backstress" |+| ''IF_ALP_XX'' | "backstress" (kinematic hardening) |
 | ''IF_ALP_YY'' |  :::| | ''IF_ALP_YY'' |  :::|
 | ''IF_ALP_ZZ'' |  :::|  | ''IF_ALP_ZZ'' |  :::| 
Line 28: Line 29:
 | ''IF_ALP_XZ'' |  :::| | ''IF_ALP_XZ'' |  :::|
 | ''IF_ALP_YZ'' |  :::| | ''IF_ALP_YZ'' |  :::|
-| ''IF_GL_STRAIN_XX''déformations de Green-Lagrange (dans le repère initial) |+| ''IF_GL_STRAIN_XX'' | Green-Lagrange strains (in the initial frame) |
 | ''IF_GL_STRAIN_YY'' |  :::|   | ''IF_GL_STRAIN_YY'' |  :::|  
 | ''IF_GL_STRAIN_ZZ'' |  :::|   | ''IF_GL_STRAIN_ZZ'' |  :::|  
Line 34: Line 35:
 | ''IF_GL_STRAIN_XZ'' |  :::|   | ''IF_GL_STRAIN_XZ'' |  :::|  
 | ''IF_GL_STRAIN_YZ'' |  :::|  | ''IF_GL_STRAIN_YZ'' |  :::| 
-| ''IF_NAT_STRAIN_XX''déformations Naturelles (dans le repère initial) |+| ''IF_NAT_STRAIN_XX''Natural strains (in the initial frame) |
 | ''IF_NAT_STRAIN_YY'' |  :::|  | ''IF_NAT_STRAIN_YY'' |  :::| 
 | ''IF_NAT_STRAIN_ZZ'' |  :::|   | ''IF_NAT_STRAIN_ZZ'' |  :::|  
Line 40: Line 41:
 | ''IF_NAT_STRAIN_XZ'' |  :::|   | ''IF_NAT_STRAIN_XZ'' |  :::|  
 | ''IF_NAT_STRAIN_YZ'' |  :::|  | ''IF_NAT_STRAIN_YZ'' |  :::| 
-| ''IF_BIOT_STRAIN_XX''déformations de Biot (dans le repère initial)|+| ''IF_BIOT_STRAIN_XX'' | Biot strains (in the initial frame)|
 | ''IF_BIOT_STRAIN_YY'' |  :::|   | ''IF_BIOT_STRAIN_YY'' |  :::|  
 | ''IF_BIOT_STRAIN_ZZ'' |  :::|   | ''IF_BIOT_STRAIN_ZZ'' |  :::|  
Line 46: Line 47:
 | ''IF_BIOT_STRAIN_XZ'' |  :::|   | ''IF_BIOT_STRAIN_XZ'' |  :::|  
 | ''IF_BIOT_STRAIN_YZ'' |  :::|  | ''IF_BIOT_STRAIN_YZ'' |  :::| 
-| ''IF_ALP_J2'' | contrainte cinématique équivalente |  +| ''IF_ALP_J2'' | contrainte cinématique équivalente :?: |  
-| ''IF_P''pression |  +| ''IF_P''pressure |  
-| ''IF_EPL''déformation plastique équivalente |  +| ''IF_EPL''equivalent plastic strain |  
-| ''IF_DEPL''taux de déformation plastique équivalente |  +| ''IF_DEPL''equivalent plastic strain rate |  
-| ''IF_EVMS''contrainte de von Mises |  +| ''IF_EVMS'' | von Mises stress |  
-| ''IF_TRIAX''triaxialité des contraintes T = contrainte_hydrostatique / contrainte_équivalente |  +| ''IF_CRITERION''Plastic Criterion (different to EVMS if VonMises is not used as plastic Critetion) |  
-| ''IF_DYNAMIC_YIELD''limite d'élasticité dynamique|  +| ''IF_YIELD_STRESS''yield stress |  
-| ''IF_STATIC_YIELD''limite d'élasticité statique |  +''IF_VISCOPLAST_STRESS'' | Visco-Plastic Stress |  
-| ''IF_GRAIN_SIZE''taille de grains |  +| ''IF_GRAINSIZE''grain size Value |  
-| ''IF_ISO_DAMAGE''endomagement isotrope |  +''IF_GRAINSIZE_STRESS'' | grain size Stress |  
-| ''IF_DAMAGE_XX''endomagement orthotrope |+| ''IF_TRIAX'' | stress triaxiality T = hydrostatic stress / equivalent stress |  
 +| ''IF_RUPT_CRIT''rupture Criterion 
 +| ''IF_ISO_DAMAGE''isotropic damage |  
 +| ''IF_DAMAGE_XX''orthotropic damage |
 | ''IF_DAMAGE_YY'' |   :::| | ''IF_DAMAGE_YY'' |   :::|
 | ''IF_DAMAGE_ZZ'' |   :::| | ''IF_DAMAGE_ZZ'' |   :::|
Line 62: Line 66:
 | ''IF_DAMAGE_YZ'' |   :::| | ''IF_DAMAGE_YZ'' |   :::|
 | ''IF_DAMAGE_XZ'' |   :::| | ''IF_DAMAGE_XZ'' |   :::|
-| ''IF_RHO''densité |  +| ''IF_RHO''density |  
-| ''IF_FLUX_X'' | flux de température +| ''IF_FLUX_X''heat flux | 
 | ''IF_FLUX_Y'' |  :::|  | ''IF_FLUX_Y'' |  :::| 
 | ''IF_FLUX_Z'' |  :::|  | ''IF_FLUX_Z'' |  :::| 
-| ''IF_GRADT_X'' | gradient de température +| ''IF_GRADT_X''temperature gradient | 
 | ''IF_GRADT_Y'' |  :::|  | ''IF_GRADT_Y'' |  :::| 
 | ''IF_GRADT_Z''  |  :::|  | ''IF_GRADT_Z''  |  :::| 
-| ''IF_DEV_SIG_XX_UPPER_SIDE''contraintes déviatoriques de la peau suppérieure d'une coque |+| ''IF_DEV_SIG_XX_UPPER_SIDE''stress deviator tensor - upper skin of a shell{{:doc:user:ico-expert.png?18|Expert!}}{{:doc:user:ico-danger.png?18|Danger!}} |
 | ''IF_DEV_SIG_YY_UPPER_SIDE'' |  :::| | ''IF_DEV_SIG_YY_UPPER_SIDE'' |  :::|
 | ''IF_DEV_SIG_ZZ_UPPER_SIDE'' |  :::| | ''IF_DEV_SIG_ZZ_UPPER_SIDE'' |  :::|
-| ''IF_SIG_XX_UPPER_SIDE''contraintes  de la peau suppérieure d'une coque |+| ''IF_SIG_XX_UPPER_SIDE''stress tensor - upper skin of a shell{{:doc:user:ico-expert.png?18|Expert!}}{{:doc:user:ico-danger.png?18|Danger!}} |
 | ''IF_SIG_YY_UPPER_SIDE'' |  :::| | ''IF_SIG_YY_UPPER_SIDE'' |  :::|
 | ''IF_SIG_ZZ_UPPER_SIDE'' |  :::| | ''IF_SIG_ZZ_UPPER_SIDE'' |  :::|
Line 78: Line 82:
 | ''IF_SIG_XZ_UPPER_SIDE'' |  :::| | ''IF_SIG_XZ_UPPER_SIDE'' |  :::|
 | ''IF_SIG_YZ_UPPER_SIDE'' |  :::| | ''IF_SIG_YZ_UPPER_SIDE'' |  :::|
-| ''IF_P_UPPER_SIDE''pression  de la peau suppérieure d'une coque |  +| ''IF_P_UPPER_SIDE''pressure - upper skin of a shell{{:doc:user:ico-expert.png?18|Expert!}}{{:doc:user:ico-danger.png?18|Danger!}} |  
-| ''IF_EPL_UPPER_SIDE''déformation plastique équivalente de la peau suppérieure d'une coque |  +| ''IF_EPL_UPPER_SIDE''equivalent plastic strain - upper skin of a shell{{:doc:user:ico-expert.png?18|Expert!}}{{:doc:user:ico-danger.png?18|Danger!}} |  
-| ''IF_DEV_SIG_XX_LOWER_SIDE''contraintes déviatoriques de la peau inférieure d'une coque |+| ''IF_DEV_SIG_XX_LOWER_SIDE''stress deviator tensor - lower skin of a shell{{:doc:user:ico-expert.png?18|Expert!}}{{:doc:user:ico-danger.png?18|Danger!}}  |
 | ''IF_DEV_SIG_YY_LOWER_SIDE'' |  :::| | ''IF_DEV_SIG_YY_LOWER_SIDE'' |  :::|
 | ''IF_DEV_SIG_ZZ_LOWER_SIDE'' |  :::| | ''IF_DEV_SIG_ZZ_LOWER_SIDE'' |  :::|
-| ''IF_SIG_XX_LOWER_SIDE''contraintes  de la peau inférieure d'une coque |+| ''IF_SIG_XX_LOWER_SIDE''stress tensor - lower skin of a shell{{:doc:user:ico-expert.png?18|Expert!}}{{:doc:user:ico-danger.png?18|Danger!}} |
 | ''IF_SIG_YY_LOWER_SIDE'' |  :::| | ''IF_SIG_YY_LOWER_SIDE'' |  :::|
 | ''IF_SIG_ZZ_LOWER_SIDE'' |  :::| | ''IF_SIG_ZZ_LOWER_SIDE'' |  :::|
Line 89: Line 93:
 | ''IF_SIG_XZ_LOWER_SIDE'' |  :::| | ''IF_SIG_XZ_LOWER_SIDE'' |  :::|
 | ''IF_SIG_YZ_LOWER_SIDE'' |  :::| | ''IF_SIG_YZ_LOWER_SIDE'' |  :::|
-| ''IF_P_LOWER_SIDE''pression  de la peau inférieure d'une coque |  +| ''IF_P_LOWER_SIDE''pressure - lower skin of a shell{{:doc:user:ico-expert.png?18|Expert!}}{{:doc:user:ico-danger.png?18|Danger!}} |  
-| ''IF_EPL_LOWER_SIDE''déformation plastique équivalente de la peau inférieure d'une coque |  +| ''IF_EPL_LOWER_SIDE''equivalent plastic strain - lower skin of a shell{{:doc:user:ico-expert.png?18|Expert!}}{{:doc:user:ico-danger.png?18|Danger!}} |  
-| ''IF_THICKNESS''épaisseur déformée d'une coque +| ''IF_THICKNESS''deformed thickness of a shell{{:doc:user:ico-expert.png?18|Expert!}}{{:doc:user:ico-danger.png?18|Danger!}} 
-| ''IF_CURVATURE_XX''courbure d'une coque |+| ''IF_CURVATURE_XX''shell curvatures{{:doc:user:ico-expert.png?18|Expert!}}{{:doc:user:ico-danger.png?18|Danger!}} |
 | ''IF_CURVATURE_YY'' |  :::| | ''IF_CURVATURE_YY'' |  :::|
 | ''IF_CURVATURE_ZZ'' |  :::| | ''IF_CURVATURE_ZZ'' |  :::|
Line 98: Line 102:
 | ''IF_CURVATURE_XZ'' |  :::| | ''IF_CURVATURE_XZ'' |  :::|
 | ''IF_CURVATURE_YZ'' |  :::| | ''IF_CURVATURE_YZ'' |  :::|
-| ''IF_TORQUE_XX''couple par unité de longueur d'une coque |+| ''IF_TORQUE_XX''shell torques{{:doc:user:ico-expert.png?18|Expert!}}{{:doc:user:ico-danger.png?18|Danger!}} |
 | ''IF_TORQUE_YY'' |  :::| | ''IF_TORQUE_YY'' |  :::|
 | ''IF_TORQUE_ZZ'' |  :::| | ''IF_TORQUE_ZZ'' |  :::|
Line 104: Line 108:
 | ''IF_TORQUE_XZ'' |  :::| | ''IF_TORQUE_XZ'' |  :::|
 | ''IF_TORQUE_YZ'' |  :::| | ''IF_TORQUE_YZ'' |  :::|
-| ''IF_FTOTAL_XX'' | gradient de déformation |+| ''IF_FTOTAL_XX''deformation gradient |
 | ''IF_FTOTAL_YY'' |  :::| | ''IF_FTOTAL_YY'' |  :::|
 | ''IF_FTOTAL_ZZ'' |  :::| | ''IF_FTOTAL_ZZ'' |  :::|
Line 113: Line 117:
 | ''IF_FTOTAL_ZX'' |  :::| | ''IF_FTOTAL_ZX'' |  :::|
 | ''IF_FTOTAL_ZY'' |  :::| | ''IF_FTOTAL_ZY'' |  :::|
 +| ''IF_LODE_PARAMETER'' | Lode parameter $\in [-1,1]$ |
  
-Ces codes sont par exemple utilisés dans [[doc:user:results:courbes_res]] pour spécifier le type de grandeur à archiver sur disque.+This codes are to be used in [[doc:user:results:courbes_res]] to specify which field must be archived
  
-Remarque importanteles contraintes IF_SIG_XX sont toujours des contraintes de Cauchy, qu'on utilise une formulation [[doc:user:elements:volumes:iso_hypo_materials#evpisohhypomaterial|hypoélastique]] ou [[doc:user:elements:volumes:hyper_materials#neohookeanhyperpk2material|hyperélastique]]. Pour obtenir les contraintes de Piola-Kirchhoff numéro 2, il faut appliquer la formule de transformation à partir du tenseur F (IF_FTOTAL_XX, ...):+Important note''IF_SIG_XX'' stresses are always Cauchy stresseswhether a [[doc:user:elements:volumes:iso_hypo_materials#evpisohhypomaterial|hypoelastic]] or [[doc:user:elements:volumes:hyper_materials#neohookeanhyperpk2material|hyperelastic]] formulation is usedTo get Piola-Kirchhoff-stressesthe transformation formula must be applied, used the gradient deformation tensor (''IF_FTOTAL_XX'', ...):
  
 $$ $$
- \boldsymbol{\sigma}_{cauchy} = \dfrac{\boldsymbol{F}\,\boldsymbol{\sigma}_{PK2}\,\boldsymbol{F}^T}{det(F_{total})}+ \boldsymbol{\sigma}_{\text{cauchy}} = \dfrac{\mathbf{F}\,\boldsymbol{\sigma}_{\text{PK2}}\,\mathbf{F}^T}{\det(\mathbf{F}_{\text{total}})}
 $$ $$
doc/user/general/ifields.1389176480.txt.gz · Last modified: 2016/03/30 15:22 (external edit)

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki