Metafor

ULiege - Aerospace & Mechanical Engineering

User Tools

Site Tools


doc:user:elements:volumes:iso_hypo_materials

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
doc:user:elements:volumes:iso_hypo_materials [2016/09/07 13:04] – [KelvinVoigtViscoElastHypoMaterial] papeleuxdoc:user:elements:volumes:iso_hypo_materials [2022/07/14 12:41] (current) papeleux
Line 17: Line 17:
 | Young's modulus                                    |  ''ELASTIC_MODULUS''  |              | | Young's modulus                                    |  ''ELASTIC_MODULUS''  |              |
 | Poisson Ratio                                      |   ''POISSON_RATIO''                | | Poisson Ratio                                      |   ''POISSON_RATIO''                |
 +| Material Stiffness  \\ (STIFF_ANALYTIC - STIFF_NUMERIC) \\ only if element Stiffness == STIFF_ANALYTIC | ''MATERIALSTIFFMETHOD''  |      -       |
 | Objectivity Method \\ (Jaumann = 0, GreenNaghdi = 1) |    ''OBJECTIVITY''    |      -       | | Objectivity Method \\ (Jaumann = 0, GreenNaghdi = 1) |    ''OBJECTIVITY''    |      -       |
 | Orthotropic axis                                      ''ORTHO_AX1_X''    |      -       | | Orthotropic axis                                      ''ORTHO_AX1_X''    |      -       |
Line 37: Line 38:
 | Young's modulus                                |  ''ELASTIC_MODULUS''  |             | | Young's modulus                                |  ''ELASTIC_MODULUS''  |             |
 | Poisson ratio                        |   ''POISSON_RATIO''               | | Poisson ratio                        |   ''POISSON_RATIO''               |
 +| Material Stiffness  \\ (STIFF_ANALYTIC - STIFF_NUMERIC) \\ only if element Stiffness == STIFF_ANALYTIC | ''MATERIALSTIFFMETHOD''  |      -       |
 | Objectivity method \\ (Jaumann = 0, GreenNaghdi = 1)      ''OBJECTIVITY''    |           | | Objectivity method \\ (Jaumann = 0, GreenNaghdi = 1)      ''OBJECTIVITY''    |           |
 | Orthotropic axis                              |    ''ORTHO_AX1_X''    |           | | Orthotropic axis                              |    ''ORTHO_AX1_X''    |           |
Line 78: Line 80:
 | Young's modulus                                    ''ELASTIC_MODULUS''  |    TO/TM     | | Young's modulus                                    ''ELASTIC_MODULUS''  |    TO/TM     |
 | Poisson Ratio                                       ''POISSON_RATIO''      TO/TM     | | Poisson Ratio                                       ''POISSON_RATIO''      TO/TM     |
 +| Material Stiffness  \\ (STIFF_ANALYTIC - STIFF_NUMERIC) \\ only if element Stiffness == STIFF_ANALYTIC | ''MATERIALSTIFFMETHOD''  |      -       |
 | Viscosity coefficient                               ''VISCO_ETA''          TO/TM     | | Viscosity coefficient                               ''VISCO_ETA''          TO/TM     |
  
Line 105: Line 108:
 \begin{cases} \begin{cases}
 p^{1}      &= p^{0} + 3K {\Delta\epsilon}_{ii} \\ p^{1}      &= p^{0} + 3K {\Delta\epsilon}_{ii} \\
-\underline{s}_{E}^{1}  &= \underline{s}_{E}^{0} + 2G {\Delta\hat{\underline{\epsilon}}} \\ 
 \underline{s}^{1}  &= \underline{s}_{E}^{1} + \underline{s}^{1}_{M1} + \underline{s}^{1}_{M2} \underline{s}^{1}  &= \underline{s}_{E}^{1} + \underline{s}^{1}_{M1} + \underline{s}^{1}_{M2}
 \end{cases} \end{cases}
 $$ $$
 +Stresses in each branch are computed using : 
 $$ $$
 \begin{cases} \begin{cases}
-\underline{s}^{1}_{M1} &= e^{(\frac{-\Delta t}{\tau_{1}})} \underline{s}^{0}_{M1} + \Gamma_{1} (1-e^{\frac{-\Delta t}{\tau_{1}}}) \frac{\tau_{1}}{\Delta t} 2G {\Delta\underline{\epsilon}} \\ +\underline{s}_{E}^{1}  &= \underline{s}_{E}^{0} + 2G {\Delta\hat{\underline{\epsilon}}} \\ 
-\underline{s}^{1}_{M2} &= e^{(\frac{-\Delta t}{\tau_{2}})} \underline{s}^{0}_{M2} + \Gamma_{2} (1-e^{\frac{-\Delta t}{\tau_{2}}}) \frac{\tau_{2}}{\Delta t} 2G {\Delta\underline{\epsilon}} \\+\underline{s}^{1}_{M1} &= e^{(\frac{-\Delta t}{\tau_{1}})} \underline{s}^{0}_{M1} + \Gamma_{1} (1-e^{\frac{-\Delta t}{\tau_{1}}}) \frac{\tau_{1}}{\Delta t} 2G {\Delta\hat{\underline{\epsilon}}} \\ 
 +\underline{s}^{1}_{M2} &= e^{(\frac{-\Delta t}{\tau_{2}})} \underline{s}^{0}_{M2} + \Gamma_{2} (1-e^{\frac{-\Delta t}{\tau_{2}}}) \frac{\tau_{2}}{\Delta t} 2G {\Delta\hat{\underline{\epsilon}}} \\
 \end{cases} \end{cases}
 $$ $$
Line 128: Line 131:
 | Young's modulus                                    ''ELASTIC_MODULUS''  |    TO/TM     | | Young's modulus                                    ''ELASTIC_MODULUS''  |    TO/TM     |
 | Poisson Ratio                                       ''POISSON_RATIO''      TO/TM     | | Poisson Ratio                                       ''POISSON_RATIO''      TO/TM     |
 +| Material Stiffness  \\ (STIFF_ANALYTIC - STIFF_NUMERIC) \\ only if element Stiffness == STIFF_ANALYTIC | ''MATERIALSTIFFMETHOD''  |      -       |
 | Number of Maxwell branches 1 (default) or 2        ''NBMAXWELLBRANCH''  |      -       | | Number of Maxwell branches 1 (default) or 2        ''NBMAXWELLBRANCH''  |      -       |
 | Maxwel 1 Stiffness                                |   ''VISCO_MU1''            -       | | Maxwel 1 Stiffness                                |   ''VISCO_MU1''            -       |
Line 158: Line 162:
 | Young's Modulus                                      |  ''ELASTIC_MODULUS''      ''TM''  | | Young's Modulus                                      |  ''ELASTIC_MODULUS''      ''TM''  |
 | Poisson Ratio                                       ''POISSON_RATIO''      |    -     | | Poisson Ratio                                       ''POISSON_RATIO''      |    -     |
 +| Material Stiffness  \\ (STIFF_ANALYTIC - STIFF_NUMERIC) \\ only if element Stiffness == STIFF_ANALYTIC | ''MATERIALSTIFFMETHOD''  |      -       |
 | Thermal Expansion                                  ''THERM_EXPANSION''      ''TM''  | | Thermal Expansion                                  ''THERM_EXPANSION''      ''TM''  |
 | Number of the material law which defines the yield stress $\sigma_{yield}$    |      ''YIELD_NUM''          -     | | Number of the material law which defines the yield stress $\sigma_{yield}$    |      ''YIELD_NUM''          -     |
Line 203: Line 208:
 | Young's Modulus                                                              |  ''ELASTIC_MODULUS''  |  ''TO/TM''  | | Young's Modulus                                                              |  ''ELASTIC_MODULUS''  |  ''TO/TM''  |
 | Poisson Ratio                                                          |   ''POISSON_RATIO''    ''TO/TM''  | | Poisson Ratio                                                          |   ''POISSON_RATIO''    ''TO/TM''  |
 +| Material Stiffness  \\ (STIFF_ANALYTIC - STIFF_NUMERIC) \\ only if element Stiffness == STIFF_ANALYTIC | ''MATERIALSTIFFMETHOD''  |      -       |
 | Thermal expansion                                                          ''THERM_EXPANSION''  |  ''TO/TM''  | | Thermal expansion                                                          ''THERM_EXPANSION''  |  ''TO/TM''  |
 | Number of the material law which defines the yield stress $\sigma_{yield}$    |      ''YIELD_NUM''    |    -        | | Number of the material law which defines the yield stress $\sigma_{yield}$    |      ''YIELD_NUM''    |    -        |
Line 236: Line 242:
 | Young's Modulus                                      |  ''ELASTIC_MODULUS''      ''TM''  | | Young's Modulus                                      |  ''ELASTIC_MODULUS''      ''TM''  |
 | Poisson Ratio                                  |   ''POISSON_RATIO''      |    -     | | Poisson Ratio                                  |   ''POISSON_RATIO''      |    -     |
 +| Material Stiffness  \\ (STIFF_ANALYTIC - STIFF_NUMERIC) \\ only if element Stiffness == STIFF_ANALYTIC | ''MATERIALSTIFFMETHOD''  |      -       |
 | Thermal expansion                                  ''THERM_EXPANSION''      ''TM''  | | Thermal expansion                                  ''THERM_EXPANSION''      ''TM''  |
 | Number of the material law which defines the yield stress $\sigma_{yield}$  |      ''YIELD_NUM''          -     | | Number of the material law which defines the yield stress $\sigma_{yield}$  |      ''YIELD_NUM''          -     |
Line 269: Line 276:
 | Young's Modulus                                      |  ''ELASTIC_MODULUS''  |  ''TO/TM''  | | Young's Modulus                                      |  ''ELASTIC_MODULUS''  |  ''TO/TM''  |
 | Poisson Ratio                                  |   ''POISSON_RATIO''    ''TO/TM''  | | Poisson Ratio                                  |   ''POISSON_RATIO''    ''TO/TM''  |
 +| Material Stiffness  \\ (STIFF_ANALYTIC - STIFF_NUMERIC) \\ only if element Stiffness == STIFF_ANALYTIC | ''MATERIALSTIFFMETHOD''  |      -       |
 | Thermal Expansion                                |  ''THERM_EXPANSION''  |  ''TO/TM''  | | Thermal Expansion                                |  ''THERM_EXPANSION''  |  ''TO/TM''  |
 | Number of the material law which defines the yield stress $\sigma_{yield}$        ''YIELD_NUM''  |  -   | | Number of the material law which defines the yield stress $\sigma_{yield}$        ''YIELD_NUM''  |  -   |
Line 308: Line 316:
 | Young's Modulus                             ''ELASTIC_MODULUS''  | | | Young's Modulus                             ''ELASTIC_MODULUS''  | |
 | Poisson Ratio                    |    ''POISSON_RATIO''   | | | Poisson Ratio                    |    ''POISSON_RATIO''   | |
 +| Material Stiffness  \\ (0 : Ana - 1 : Num) \\ only if element Stiffness == STIFF_ANALYTIC | ''MATERIALSTIFFMETHOD''  |      -       |
 | Number of the material law which defines the yield stress $\sigma_{yield}$ |      ''YIELD_NUM''          -     | | Number of the material law which defines the yield stress $\sigma_{yield}$ |      ''YIELD_NUM''          -     |
 | Number of the damage evolution law              |     ''DAMAGE_NUM''     | | | Number of the damage evolution law              |     ''DAMAGE_NUM''     | |
Line 350: Line 359:
  
 $$ $$
-f=\dfrac{\overline{\sigma}}{1-D}-\sigma_{yield}=0+f=\dfrac{\overline{\sigma}}{1-h\cdot D}-\sigma_{yield}=0
 $$ $$
  
-where $ \overline{\sigma} $ is the equivalent stress computed as a function of [[doc:user:elements:volumes:plasticity_criterion#vonmisesplasticcriterion|Von Mises plasticy criterion]], $ \sigma_{yield} $ is the yield stress, $ D $ is the damage variable updated as a function of the [[doc:user:elements:volumes:continuousdamage|damage evolution law]].+where $ \overline{\sigma} $ is the equivalent stress computed as a function of [[doc:user:elements:volumes:plasticity_criterion#vonmisesplasticcriterion|Von Mises plasticy criterion]], $ \sigma_{yield} $ is the yield stress, $ D $ is the damage variable updated as a function of the [[doc:user:elements:volumes:continuousdamage|damage evolution law]]. Moreover, $h$ is the Micro-Crack Closure Effect parameter that makes the distinction of the weakening effect of damage under compressive and tensile stress states, which is defined as: 
 +$$ 
 + h = \left\{ 
 + \begin{array}{ll} 
 +  \text{DAMAGE_MCCE} &\mbox{, if } \dfrac{p}{J_2}< 0.0\\ 
 +  1.0 &\mbox{, if } \dfrac{p}{J_2}\geq 0.0\\ 
 + \end{array} 
 + \right. 
 +$$
  
 The evolution law coupled with plasticity can be integrated three ways depending on the parameter ''TYPE_INTEG'': The evolution law coupled with plasticity can be integrated three ways depending on the parameter ''TYPE_INTEG'':
Line 367: Line 384:
 | Young's Modulus                                 ''ELASTIC_MODULUS''    ''TM''  | | Young's Modulus                                 ''ELASTIC_MODULUS''    ''TM''  |
 | Poisson Ratio                              ''POISSON_RATIO''    |    -     | | Poisson Ratio                              ''POISSON_RATIO''    |    -     |
 +| Material Stiffness  \\ (0 : Ana - 1 : Num) \\ only if element Stiffness == STIFF_ANALYTIC | ''MATERIALSTIFFMETHOD''  |      -       |
 | Number of the material law which defines the yield stress $\sigma_{yield}$ |      ''YIELD_NUM''          -     | | Number of the material law which defines the yield stress $\sigma_{yield}$ |      ''YIELD_NUM''          -     |
 | Number of the damage evolution law      |     ''DAMAGE_NUM''      |    -     | | Number of the damage evolution law      |     ''DAMAGE_NUM''      |    -     |
 | Initial damage                             ''DAMAGE_INIT''        -     | | Initial damage                             ''DAMAGE_INIT''        -     |
 | Integration method                             ''TYPE_INTEG''      |    -     | | Integration method                             ''TYPE_INTEG''      |    -     |
 +| Micro-Crack Closure Effect parameter (=1.0 by default)      ''DAMAGE_MCCE''     | |
  
 ===== ContinuousAnisoDamageEvpIsoHHypoMaterial ===== ===== ContinuousAnisoDamageEvpIsoHHypoMaterial =====
Line 401: Line 420:
 | Young's Modulus                                 ''ELASTIC_MODULUS''    ''TM''  | | Young's Modulus                                 ''ELASTIC_MODULUS''    ''TM''  |
 | Poisson Ratio                              ''POISSON_RATIO''    |    -     | | Poisson Ratio                              ''POISSON_RATIO''    |    -     |
 +| Material Stiffness  \\ (0 : Ana - 1 : Num) \\ only if element Stiffness == STIFF_ANALYTIC | ''MATERIALSTIFFMETHOD''  |      -       |
 | Number of the material law which defines the yield stress $\sigma_{yield}$        ''YIELD_NUM''          -     | | Number of the material law which defines the yield stress $\sigma_{yield}$        ''YIELD_NUM''          -     |
 | Number of the damage evolution law      |     ''DAMAGE_NUM''      |    -     | | Number of the damage evolution law      |     ''DAMAGE_NUM''      |    -     |
Line 427: Line 447:
 | Young's Modulus                                                    ''ELASTIC_MODULUS''  |  ''TO/TM''  | | Young's Modulus                                                    ''ELASTIC_MODULUS''  |  ''TO/TM''  |
 | Poisson Ratio                                                  ''POISSON_RATIO''  |    -       | | Poisson Ratio                                                  ''POISSON_RATIO''  |    -       |
 +| Material Stiffness  \\ (0 : Ana - 1 : Num) \\ only if element Stiffness == STIFF_ANALYTIC | ''MATERIALSTIFFMETHOD''  |      -       |
 | Number of the material law which defines the yield stress $\sigma_{yield}$        ''YIELD_NUM''          -     | | Number of the material law which defines the yield stress $\sigma_{yield}$        ''YIELD_NUM''          -     |
 | Number of the damage evolution law                          |     ''DAMAGE_NUM''    |    -       | | Number of the damage evolution law                          |     ''DAMAGE_NUM''    |    -       |
doc/user/elements/volumes/iso_hypo_materials.1473246296.txt.gz · Last modified: 2016/09/07 13:04 by papeleux

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki